Author Topic: Wilflex Performance on Sublimated Poly?  (Read 1972 times)

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Wilflex Performance on Sublimated Poly?
« on: June 05, 2015, 06:31:56 PM »
Wilflex Performance White printed onto already dye sublimated poly.  The area getting printed is 100% black dye sub.   I know there are more appropriate inks and materials for this project but 'tis the season for "we need it in three days" and that's what we have on hand.  Trouble is I have no testers.  Anyone done it?


Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
Re: Wilflex Performance on Sublimated Poly?
« Reply #1 on: July 27, 2015, 03:08:26 PM »
Try 367 one stroke ink.

Offline jvanick

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2477
Re: Wilflex Performance on Sublimated Poly?
« Reply #2 on: July 27, 2015, 03:48:37 PM »
who's sublimated poly?

I hear that Augusta is ok...

Badger is definitely NOT ok, and white wilflex performance will bleed like a stuck pig.

you may be able to get away with wiflex's performance underbase grey tho, but I have no experience in testing it.

we did run these with Matsui HSA blocker black and then HSA white with Fixer-N added, cured at 230 degrees and came out perfect.  Customer loved the Matte print as well.

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: Wilflex Performance on Sublimated Poly?
« Reply #3 on: July 27, 2015, 03:55:04 PM »
Mustang would work.
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Re: Wilflex Performance on Sublimated Poly?
« Reply #4 on: July 27, 2015, 04:08:36 PM »
Printed this today,  Wilflex performance White, green and black.

If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
Re: Wilflex Performance on Sublimated Poly?
« Reply #5 on: July 27, 2015, 04:09:13 PM »
It's difficult to print white on underbase black

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Wilflex Performance on Sublimated Poly?
« Reply #6 on: July 27, 2015, 04:20:21 PM »
Printed this today,  Wilflex performance White, green and black.




Nice, follow up on if it sublimates.  For my original conundrum we used a blocking digital transfer but this would be really good to know down the road.

Offline GaryG

  • !!!
  • Hero Member
  • *****
  • Posts: 750
Re: Wilflex Performance on Sublimated Poly?
« Reply #7 on: July 27, 2015, 04:55:25 PM »
Is that a hit flash hit white?
No black under?
Looks like good dryer temp~


Offline jvanick

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2477
Re: Wilflex Performance on Sublimated Poly?
« Reply #8 on: July 27, 2015, 04:58:37 PM »
we've had no luck with Wilflex Performance White on Badger Digital Camo....  that stuff bleeds TERRIBLE.

cure temps: 290 degrees at roughly 45 seconds in the gas dryer.
it bleeds almost as soon as it comes off the belt.


Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6056
Re: Wilflex Performance on Sublimated Poly?
« Reply #9 on: July 27, 2015, 05:23:06 PM »
the new Augusta camps have been good here using the Rutland poly white. I understand the design is screenprinted... we've run a few jobs with no bleeding through the white. Oh happy day...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Re: Wilflex Performance on Sublimated Poly?
« Reply #10 on: July 27, 2015, 08:55:43 PM »
Is that a hit flash hit white?
No black under?
Looks like good dryer temp~

That is the Augusta one, they are far better than the badger ones, but I run the same technique on both.

1.black
2.white
3.flash
4.white
5.flash
6.white
7.flash
8.Green

Its slower, but check the results!  3 screens.  No black under.
« Last Edit: July 27, 2015, 08:59:06 PM by dirkdiggler »
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender