I've been using this for a few months. It's almost perfect. Fresh films will still stick a little bit, but not near as bad as all the other PP emulsions we've tested. It reclaims better than HVP and burns a little faster but does tend to break down on press faster than the HVP. It has a great exposure latitude so on yellow mesh you can go really long on burn times with the LED if you need to, but be careful with white mesh. White mesh and our LED are much harder to work with and it's easy to overexpose (well, not really but detail will not wash out with a 25+ second burn time). I really like the emulsion and we are using it over the HVP because of the film sticking issue and reclaim time.