« previous next »
Pages: [1]   Go Down

Author Topic: I need help with an ai file  (Read 3312 times)

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
I need help with an ai file
« on: May 13, 2015, 05:22:50 PM »
doesn't want to place nice for me. and needs an intervention.
Who can I send it to for therapy and conversion to pdf or eps?

Thanks friends
Logged
That rug really tied the room together, did it not?

Offline balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 991
Re: I need help with an ai file
« Reply #1 on: May 13, 2015, 05:40:10 PM »
orders at balloonprinting dot com
I am here for about 20 minutes...
Logged
When you dig grave will you make it shallow so that I can feel the rain?

Offline Ripcord

  • Sr. Member
  • ****
  • Posts: 283
Re: I need help with an ai file
« Reply #2 on: May 13, 2015, 05:52:51 PM »
I can do it for you if you send it to me, but I can also tell you how I do it (because I don't have AI.)

1. Open the AI file with Adobe Viewer
2. Save it as a PDF
3. Open the PDF in Ghostview
4. Use the "convert" command to convert it to "pdfwrite"

Now you should be able to import the new file into Corel Draw.
Logged
Raster to vector conversion

Offline balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 991
Re: I need help with an ai file
« Reply #3 on: May 13, 2015, 05:57:45 PM »
I am no help... Someone else may be better.
Logged
When you dig grave will you make it shallow so that I can feel the rain?

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: I need help with an ai file
« Reply #4 on: May 13, 2015, 06:04:19 PM »
Andy send it over.
Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: I need help with an ai file
« Reply #5 on: May 13, 2015, 06:10:47 PM »
Gilly and Rip, you're both getting it as well. Hey Matt, did it open but just strange?
Logged
That rug really tied the room together, did it not?

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6057
Re: I need help with an ai file
« Reply #6 on: May 13, 2015, 06:31:53 PM »
did you get this done Andy?

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: I need help with an ai file
« Reply #7 on: May 13, 2015, 06:43:15 PM »
not yet, haven't heard back from Gilly and Rip, but Balloon struck out as well.
On it's way to you next

I have word in to the artist through the client just in case
Logged
That rug really tied the room together, did it not?

Offline Screened Gear

  • Gonzo Member
  • ******
  • Posts: 2580
Re: I need help with an ai file
« Reply #8 on: May 13, 2015, 06:48:18 PM »
Send it to me, I will take a look.

Sales@screenedgear.com

Logged

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: I need help with an ai file
« Reply #9 on: May 13, 2015, 06:51:44 PM »
Where did you send it Andy?  I'm not seeing it.
Logged

Offline Ripcord

  • Sr. Member
  • ****
  • Posts: 283
Re: I need help with an ai file
« Reply #10 on: May 13, 2015, 07:12:36 PM »
Check your email. I just sent an EPS
Logged
Raster to vector conversion

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6057
Re: I need help with an ai file
« Reply #11 on: May 13, 2015, 07:13:43 PM »
The file I got has 0 bytes... funky huh? I see Rip sent you something though.


Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: I need help with an ai file
« Reply #12 on: May 13, 2015, 07:25:37 PM »
forgot your "r", and added as "s" in steve's. Both forwarded with corrected addresses.
Rip's just came in, and is a little mucked up, like it combines elements of the the front and back designs. I don't really know, because except for a ps/jpg mock I have, I wouldn't have know how it should look.

Trouble with this tyoe of thing, I have no idea how complete the files are or are meant to be. Whether it is just the logo we are seeing, or if it was complete with text.
Logged
That rug really tied the room together, did it not?

Offline Ripcord

  • Sr. Member
  • ****
  • Posts: 283
Re: I need help with an ai file
« Reply #13 on: May 13, 2015, 07:36:53 PM »
I fixed it...
Logged
Raster to vector conversion

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: I need help with an ai file
« Reply #14 on: May 13, 2015, 08:14:34 PM »
Okay all, thanks for playing. The artist just called, and yes, the file is incomplete. She apparently thought that I was  doing the layout and just needed the raw logo.
Of course, that didn't open exactly correctly either, but new stuff is on the way tomorrow. We'll see
Logged
That rug really tied the room together, did it not?
Pages: [1]   Go Up
« previous next »