Author Topic: Glove Cylinder Brother BAS-416a  (Read 1108 times)

Offline BlueBelleLarkhall

  • Newbie
  • *
  • Posts: 7
Glove Cylinder Brother BAS-416a
« on: April 24, 2015, 05:25:18 PM »
Very New to embroidery and one of my main lines is Gloves which I have been printing but wish to offer embroidered gloves, can't seem to find a Glove Cylinder for my machine,

Any advice would be much appreciated


Sent from my iPhone using Tapatalk


Offline Audifox

  • Sr. Member
  • ****
  • Posts: 388
Re: Glove Cylinder Brother BAS-416a
« Reply #1 on: May 01, 2015, 02:31:15 PM »
 With your machine being an older machine, I don't think you will find one. That frame works off of the quick change system that is on the Tajimas. If I remember correctly, your  brother machine does not have 270 cap capabilites.

 My suggestion would be to try something like the shoe clamps.
http://www.hooptechproducts.com/t/ShoeClamps

Or a new machine..... ::)

Offline BlueBelleLarkhall

  • Newbie
  • *
  • Posts: 7
Re: Glove Cylinder Brother BAS-416a
« Reply #2 on: May 03, 2015, 04:36:52 PM »
Thanks for your reply tested a small hoop on a glove and it worked temporary problem solved but yes may need to upgrade


Sent from my iPhone using Tapatalk
Blue Belle Media Ltd
Larkhall, Scotland,
????????GB????????