« previous next »
Pages: [1]   Go Down

Author Topic: How would you do it? (New Shop Layout)  (Read 992 times)

Offline kingscreen

  • Gonzo Member
  • ******
  • Posts: 1161
How would you do it? (New Shop Layout)
« on: April 20, 2015, 07:55:42 PM »
We are moving into a large building soon and are starting to plan the new layout. 
Here's a PSD file 1cm = 1ft. with the presses and dryers as moveable layers.

How would you lay it out?

https://dl.dropboxusercontent.com/u/61484495/SHOP-LAYOUT.psd
Logged
Scott Garnett
King Screen

Offline willy35

  • Full Member
  • ***
  • Posts: 163
  • www.broceliande-serigraphie.com
Re: How would you do it? (New Shop Layout)
« Reply #1 on: April 21, 2015, 02:44:57 AM »
I looked at the PSD, indeed, very large building.

I would connect to dryer2 with sidewider 66 and future sabre 8/10 and Dryer 1 with the remaining press
1 auto per dryer.


Logged
www.broceliande-serigraphie.com
San Gen Shugi - real place (Gen-ba), real part (Gen-butsu), reality (Gen-jitsu)

Offline willy35

  • Full Member
  • ***
  • Posts: 163
  • www.broceliande-serigraphie.com
Re: How would you do it? (New Shop Layout)
« Reply #2 on: April 21, 2015, 02:47:02 AM »
Last I prefer to use M&R shop layout
http://forums.mrprint.com/showthread.php?366-Download-Free-M-amp-R-Shop-Floor-Layout-Software

or illustrator, to simulate the space require around the press and because it is more handy to move or make change.
Logged
www.broceliande-serigraphie.com
San Gen Shugi - real place (Gen-ba), real part (Gen-butsu), reality (Gen-jitsu)
Pages: [1]   Go Up
« previous next »