Don't have a sabre, but I did buy the roller/teflon kit for my diamondback.
All it is is the roller squeegee and a pre-cut piece of teflon. You'll have to buy the adhesive of your choice to glue the teflon onto the back of the screen.
I would assume it works just the same for the sabre as it does for other presses!
As for tips on using it, just put it in the head after your flash and start reaping the benefits of it.
Or you could use it as a lint pickup screen before your first printing head. Use another screen and just spray some spray tac on the bottom, then use as normal.
