« previous next »
Pages: [1]   Go Down

Author Topic: Saati PHU Red on Starlight 3140  (Read 1466 times)

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Saati PHU Red on Starlight 3140
« on: March 23, 2015, 01:53:58 PM »
Anybody have some ballpark expo times?  Testing this week. 
Logged

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3540
Re: Saati PHU Red on Starlight 3140
« Reply #1 on: March 23, 2015, 02:21:55 PM »
Quote from: ZooCity on March 23, 2015, 01:53:58 PM
Anybody have some ballpark expo times?  Testing this week.

im pretty sure the starlight is on par with our back panel on the STE. We typically expose big blocky images between 6-8 seconds. Really fine halftones (65lpi) we are usually using our front LED bar, but we've also had some success doing it for 1 second.

All screens coated 1/1.
Logged
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline 244

  • Gonzo Member
  • ******
  • Posts: 1368
Re: Saati PHU Red on Starlight 3140
« Reply #2 on: March 23, 2015, 04:41:35 PM »
Quote from: ZooCity on March 23, 2015, 01:53:58 PM
Anybody have some ballpark expo times?  Testing this week.
Photopolymer will be around 5 seconds
Logged
Rich Hoffman

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Saati PHU Red on Starlight 3140
« Reply #3 on: March 23, 2015, 05:46:41 PM »
I just looked at the first test and a 180/48 coated 2/1 thin/sharp edge resolves 7 solid steps on a Stouffer greyscale in about 20s.   Keep in mind this is with glass in the unit and film, not CTS style.

There must be something different in the PHU to a typical photopolymer though since it has such high reported water resistance. 
Logged
Pages: [1]   Go Up
« previous next »