screen printing > DIY - From master engineered marvels to cobbled together jury-rigged or Jerry-built junk!
Our latest DIY project-a screen coating stand.
willy35:
Very nice,
this is commercial grade screen coating stand.
Shanarchy:
Wow! This is great quality!
Vastex just came out with stands like this, and also a "semi-automatic" one. Hit the foot pedal and it will lower the screen.
This one looks every bit as quality as professional quality as the Vastex stand. Great work!
Rockers:
Thanks guys, I appreciate the feedback and compliments.
Next up a new screen drying cabinet, first we will make one from wood as a sort of prototype;)
screenxpress:
I may be looking at it wrong, but it looks like the main unit is bolted to the wall and the screen is slanted so that the top is out further than the bottom.
I might be coating wrong, but I have to lean the screen in when coating and then lean it out to terminate and cut the emulsion so it does not drip everywhere.
Does it hinge somehow so it can lean out to cut the emulsion?
Rockers:
--- Quote from: screenxpress on March 21, 2015, 09:16:10 PM ---I may be looking at it wrong, but it looks like the main unit is bolted to the wall and the screen is slanted so that the top is out further than the bottom.
I might be coating wrong, but I have to lean the screen in when coating and then lean it out to terminate and cut the emulsion so it does not drip everywhere.
Does it hinge somehow so it can lean out to cut the emulsion?
--- End quote ---
That might be an optical illusion, lets not forget the photos were taken with a shitty Iphone. The top is actually a little closer to the wall then the bottom.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version