Author Topic: Sorry I need to blow off some steam.  (Read 3647 times)

Offline studog

  • !!!
  • Verified/Junior
  • **
  • Posts: 94
  • I am back
Sorry I need to blow off some steam.
« on: September 13, 2011, 02:30:24 PM »
What am I doing wrong in trying to find a good printer. One that shows up to work, sober, works a full day for a full days pay, cares about their work, and doesn't blame everyone else. I had my first printer for 7+ years. He's an alcoholic. Works great when sober. Gets in trouble with the law , drinking every 9-12 months. Have helped him out on many occasions, free legal help, ect. Finally let him go last April as he had a drinking in public ticket and I knew he was going to jail at least 30 days. Hir another one. Used to own his own business. He has 2 speeds, slower and stopped. Tell him something and doesn't do it unless he feels like it. Attention to detail is non-existant. He just printed on the pockets of 6 youth small hoodies and said well the artist said it would fit. It does fit but as always he blames others. Shows up around 8 and nothing seems to get printed until after 9. How do I go about finding a good printer. I have asked ink reps, posted on BB, craigslist. I know we pay well for the area, its a fun shop. We have lots of work but I can not keep going on with the way things are. I am not going to babysit an employee..........HAAAAAAAAAAAAAAAAAAAAAA!!!!!!!!!!!!

Thanks I feel a little better but a mojito would even help more.


Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: Sorry I need to blow off some steam.
« Reply #1 on: September 13, 2011, 02:40:34 PM »
It is very hard, you will have to go through a few to find a good one.  The problem is that the skill involved and the pay it earns don't match up.  Screen printing has become more and more detailed over the years and frankly, more difficult, yet the pay hasn't increased much at all.

Offline whitewater

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1830
Re: Sorry I need to blow off some steam.
« Reply #2 on: September 13, 2011, 02:47:51 PM »
A good tip..

Find a female that was a stay at home mom and now her kids are in school.

They have probably not worked in a bit, they are more than likely be responsible and trustworthy and will do their best.

I found one to work on saturdays and could not be happier!


Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: Sorry I need to blow off some steam.
« Reply #3 on: September 13, 2011, 03:04:32 PM »
And, usually you can pay them in benefits...at least that is the deal I have worked out with our HR manager.  Of course, I am married to her as well.

Offline studog

  • !!!
  • Verified/Junior
  • **
  • Posts: 94
  • I am back
Re: Sorry I need to blow off some steam.
« Reply #4 on: September 13, 2011, 03:14:26 PM »
And, usually you can pay them in benefits...at least that is the deal I have worked out with our HR manager.  Of course, I am married to her as well.

The married part won't work for me as I am going thru a divorce after 28+ years of marriage. And dating employees will get you  all sorts of headaches.  :'(

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: Sorry I need to blow off some steam.
« Reply #5 on: September 13, 2011, 03:35:26 PM »
Especially when you are married.   ;D

Sorry to hear that.

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: Sorry I need to blow off some steam.
« Reply #6 on: September 13, 2011, 03:41:50 PM »
So MILFS are better to hire?  ;D

I come to work to get away from dealing with women.

Online bimmridder

  • Gonzo Member
  • ******
  • Posts: 1883
Re: Sorry I need to blow off some steam.
« Reply #7 on: September 13, 2011, 03:48:11 PM »
I don't know if you can really find a good printer...I think you have to make them. Just my opinion.
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: Sorry I need to blow off some steam.
« Reply #8 on: September 13, 2011, 03:49:01 PM »
Simple Employee Application.
Give prospective employee a pen and piece of paper.
Ask them to write the word "Squeegee"
If they spell it right, thank them and show them the door.
If they misspell it. Hire them on the spot.
1 week in reclaim.
If still there, you have a keeper.
This way no "habits" to deal with.
Train them your way.
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline Fresh Baked Printing

  • Hero Member
  • *****
  • Posts: 755
  • "Tattoo Free Since 1965"
Re: Sorry I need to blow off some steam.
« Reply #9 on: September 13, 2011, 03:55:44 PM »
Ask them to write the word "Squeegee"

There's two e's at the end of Squeegee? I'm so fired.
50% of the time I'm 100% right.
http://www.spiffylab.com

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Sorry I need to blow off some steam.
« Reply #10 on: September 13, 2011, 04:20:02 PM »
Ask them to write the word "Squeegee"

There's two e's at the end of Squeegee? I'm so fired.

No no no, you can go work at Fresh Baked Printing now.  He said if they CAN'T spell it to hire them.  Meaning they have never worked in a shop before and have no "bad" habits.

Quite clever actually.

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: Sorry I need to blow off some steam.
« Reply #11 on: September 13, 2011, 04:36:13 PM »
Ask them to write the word "Squeegee"

There's two e's at the end of Squeegee? I'm so fired.


Squeegee is a french word so....spell it Sqauxzee Pas  Everyone knows that.
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: Sorry I need to blow off some steam.
« Reply #12 on: September 13, 2011, 05:02:06 PM »
Great, now it's called pulling a freedom.

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: Sorry I need to blow off some steam.
« Reply #13 on: September 13, 2011, 05:43:05 PM »
I have trouble spelling that out, it always looks wrong lol

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: Sorry I need to blow off some steam.
« Reply #14 on: September 13, 2011, 05:48:11 PM »
I agree that finding a good printer might not be the right way to go about it, make one.  We've done it both ways, hired people with experience then we've hired with no experience.  The one's without experience have turned out way better overall and much easier to manage when it comes to doing things the right way.  Over the last year or so, I've managed to find my way into more than a few local shops and I am absolutely amazed by all the dumb stuff I see printers doing, and most of these printers have been doing this for way longer than I have.  They've been taught bad habits, or perhaps they've read the wrong book, I don't know.  But I see way too many people double stroking black ink onto a white shirt and know that this industry is inundated with bad habits and techniques and I wouldn't want any of those people in my shop. 

Sorry for the rant, and I'm sorry if I offended anyone, but damn people, it doesn't have to be that hard.  Thanks for reading.
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.