Durometer

[Fresh Baked Printing]

I use 70 for everything.
Can some list examples when other durometers would be used specifically?

[Printficient]

soft triple for whites and metallics.  Hard triple for detail and dark inks. 

[ftembroidery]

I agree with the above.  I used 75/90/75 for detail work going thru 305's (4cp and sim).

[Frog]

Let's touch upon the advantages of triples.

Both the flex and actual surface hardness or softness affect a print.

So, the way I see it, a 60-90-60, has the ink deposit of a 60, with the printing characteristics (feel) of a somewhat stiffer blade. Not like a 90 though since the 90 part is only one third of the total thickness

[squeegee]

My examples:

60 single for high coverage WB, 60/90/60 on whites, or anywhere you need to put down more ink.  80 duros for fine detail, or just to put down a thinner layer, we use 80's to cut back a color that is too strong or to reduce dot gain in a sim process print, or to keep colors on a base from smearing during a run.

70's for day to day spot color stuff.

UB's we use 70 a lot, 60/90/60 a lot, depends on the result we're getting, sometimes a duro change is just what the Doc ordered.

It all depends, I used to have all 70's too, but I wouldn't be without a variety of squeegees now.