« previous next »
Pages: [1]   Go Down

Author Topic: Compressor Help  (Read 958 times)

Offline AntonySharples

  • Full Member
  • ***
  • Posts: 221
Compressor Help
« on: March 10, 2015, 02:40:21 PM »
I am getting ready to have my sRoque installed Thursday and wiring up the compressor.  Having an issue with the pressure switch.  The pressure switch has wires hooked up now, one labeled motor, one labeled line.  Those are run via flex to the motor wiring box, and then out the main flex conduit holding the 3 main power legs.  I'm not understanding where these are supposed to be hooked to.  I tried following a diagram online that had them running to L1, L2, but that trips the breaker out.  Anybody have anything for me?

Thanks,
Antony
Logged

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: Compressor Help
« Reply #1 on: March 11, 2015, 12:26:20 AM »
Advice.. Hire an electrician.

power and taxes are when i call the pros.
Logged
Blacktop Graphics Screenprinting and Consulting Services

Offline Binkspot

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1108
Re: Compressor Help
« Reply #2 on: March 11, 2015, 07:00:32 AM »
One goes to hot other magnetic coil on the contactor.

Better yet get an electrican.
Logged

Offline GKitson

  • Hero Member
  • *****
  • Posts: 720
  • Just another t-shirt guy
Re: Compressor Help
« Reply #3 on: March 11, 2015, 07:23:29 AM »
Totally agree, some things are not worth messing with.

Sheridan is correct, the IRS and anything over 110 V deserves a pro.

~Kitson
Logged
Greg Kitson
Mind's Eye Graphics Inc.
260-724-2050

Offline PylonPress

  • Verified/Junior
  • **
  • Posts: 24
Re: Compressor Help
« Reply #4 on: March 12, 2015, 11:23:20 PM »
Also just curious, are you running your air through a chiller/dryer?
Logged
Nick - Pylon Press Screen Printing
http://www.pylonpress.net
Pages: [1]   Go Up
« previous next »