Author Topic: Ever seen one of these?  (Read 2289 times)

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Ever seen one of these?
« on: August 01, 2011, 08:00:34 PM »
What am I?

I was in a box of junk that Frog ended up with, along with some cool German pens.
That rug really tied the room together, did it not?


Offline Fresh Baked Printing

  • Hero Member
  • *****
  • Posts: 755
  • "Tattoo Free Since 1965"
Re: Ever seen one of these?
« Reply #1 on: August 01, 2011, 08:02:10 PM »
Xacto blade sharpener?
50% of the time I'm 100% right.
http://www.spiffylab.com

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Ever seen one of these?
« Reply #2 on: August 01, 2011, 08:04:19 PM »
That's my guess,  the red is a softish wood. I have only seen stones used. But when I have a box or two of 100, I always go to a new one.  ;D
That rug really tied the room together, did it not?

Offline Fresh Baked Printing

  • Hero Member
  • *****
  • Posts: 755
  • "Tattoo Free Since 1965"
Re: Ever seen one of these?
« Reply #3 on: August 01, 2011, 08:15:49 PM »
Maybe the blade is supposed to be run through the wood to remove any burrs or to burnish the blade.
BTW, I still  use xacto knives and blades from my model railroad days back in the mid '70's.
50% of the time I'm 100% right.
http://www.spiffylab.com

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: Ever seen one of these?
« Reply #4 on: August 01, 2011, 08:19:25 PM »
That is a thing where you keep your x-acto blade. Instead of them just laying around, you stick them into that block and they stay there vertically.

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Ever seen one of these?
« Reply #5 on: August 01, 2011, 08:22:53 PM »
You could be right, but how good could that be to keep a really sharp point really sharp?

With hyperdermic needles, when giving serums to our dogs, we even use one for penetrating the rubber of a vial, and another for actual injection.
That rug really tied the room together, did it not?

Offline thinkdesign

  • Verified/Junior
  • **
  • Posts: 60
Re: Ever seen one of these?
« Reply #6 on: August 01, 2011, 11:24:41 PM »
We used one to stick old blades in. Didn't want to throw them in the trash. Along with keeping the knife you were using at the time in. Not sure about how it kept the blade tip sharp. I never had to cut rubylith or anything, just stuff we pasted up.

Offline Artelf2xs

  • Full Member
  • ***
  • Posts: 233
  •  Celebrating 29 years in the industry
Re: Ever seen one of these?
« Reply #7 on: September 15, 2011, 09:28:14 AM »
Looks just like Gumby's Horse Pokie right before birth?
Lif'e too short to complain about stuff ( Like typos)

Offline MrBreeze

  • !!!
  • Full Member
  • ***
  • Posts: 108
Re: Ever seen one of these?
« Reply #8 on: September 15, 2011, 11:26:57 AM »
We still use a thick cork coaster to park our exacto knives on our layout/work table and next to our exposure unit.  I don't think cork or a soft wood really damages the point very much.  Bad point, use a new blade, they're cheep.
If it's so easy, you do it.