9mm squeegee rubber

[Ryan]

anyone know of a place that stocks it? Serilor is out, won't have it for atleast 2 weeks. Looking for Triple Duro
Thanks

[ebscreen]

Apollo Rubber is the name I think. I'd have to go check a box upstairs so let me know if that doesn't get you anywhere.

[3Deep]

Call Sonny at Xenon last blades I got 70/90/70 still working fine can't say what mm though...he's on here somewhere doing nothing LOL

darryl

[1964GN]

We have been using the stuff from http://www.goldupusa.com/triple-duro-squeegee-roll/ for a couple of months not and have been very happy, with the rubber and the PRICE!

It is 9mil

[Printficient]

Call Sonny at Xenon last blades I got 70/90/70 still working fine can't say what mm though...he's on here somewhere doing nothing LOL

darryl

Thanks D.  My number is 404-895-1796.  Triple is $1.35 per inch.  Pleiger material

[Ryan]

according to Pleigers website, they don't make a 9mm? only 9.5 and 8?

~ryan

[Printficient]

according to Pleigers website, they don't make a 9mm? only 9.5 and 8?

~ryan

Has fit in M&R, MHM, Anatol, Progressive, Lawson,  Tuf, etcetera.  What press do you have

[Ryan]

SRoque

[Printficient]

Their squeegee is slightly thinner.  I would think that .5 of a mm either way would not be that critical.  Unfortunately no SRoques near me or I would test it out.

[TCT]

.5 makes a BIG difference

[Ryan]

Huge difference unfortunately. Tried forcing 9.5mm which I've done but its a giant pain

[Binkspot]

Desperate times desperate measures. You could get some 8mm and shim or thicker and CAREFULLY take a skim cut off the one side of the section that goes in the holder on a table saw.

[1964GN]

.5 makes a BIG difference

Listen to Alex! We have "been there, done that" too. Only 9mil on our S-Roque now.

[blue moon]

tech support SP stocks and sells fimor/serilor blades. I would check with them.

pierre

[Action1]

Gentlemen -

9mm = 0.354". Our standard US squeegee rubber thickness is 0.375". I don't think the .02" makes a difference.