Author Topic: EMULSION RECOMMENDATION PLEASE  (Read 9096 times)

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3540
Re: EMULSION RECOMMENDATION PLEASE
« Reply #30 on: March 06, 2015, 11:36:13 PM »
we pay $48 per gallon

Where you getting it.  PM me if you don't want to post.   Thanks.

we get ours from reece supply in Houston.
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285


Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
Re: EMULSION RECOMMENDATION PLEASE
« Reply #31 on: March 07, 2015, 06:09:36 AM »
Still not found best no diazo emulsion for water base and discharge.

Offline Binkspot

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1108
Re: EMULSION RECOMMENDATION PLEASE
« Reply #32 on: March 07, 2015, 07:54:14 AM »
We have had good results with the Saati PHU and Kiwo Discharge, when post exposed does fine with discharge and WB. But of course it's dependent on the size of the run, the most we have done has been 500 double stroked discharge with either of them.

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
Re: EMULSION RECOMMENDATION PLEASE
« Reply #33 on: March 07, 2015, 11:48:38 AM »
With diazo or without diazo?.

Offline Binkspot

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1108
Re: EMULSION RECOMMENDATION PLEASE
« Reply #34 on: March 07, 2015, 12:10:01 PM »
No Diazo, straight out of the bucket.

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Re: EMULSION RECOMMENDATION PLEASE
« Reply #35 on: March 07, 2015, 12:15:59 PM »
KIWO discharge was my go to for a LONG time, and I still love that emulsion, but without diazo it will break down.  And its WAY over priced.
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender

Offline CSPGarrett

  • Full Member
  • ***
  • Posts: 123
Re: EMULSION RECOMMENDATION PLEASE
« Reply #36 on: March 07, 2015, 12:36:26 PM »
The best price we have found is Ulano orange for $175 for a 5 gallon delivered.
Real Quality Merchandising.  - Printing & Fulfillment Services.  Contract DTG & Screen Printing. www.customshirtprints.com

Offline Binkspot

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1108
Re: EMULSION RECOMMENDATION PLEASE
« Reply #37 on: March 07, 2015, 12:55:37 PM »
Like I said we have only used on shorter runs. The only time I had an issue with the Kiwo was 200 sleeves printing over the edge of the pallet. I'm doing a 1800 run on mondy and not chancing it, running the Ulano Double Duty.

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Re: EMULSION RECOMMENDATION PLEASE
« Reply #38 on: March 07, 2015, 01:14:04 PM »
If you want an orange, look at cci orange, cheap, and I promise when you take the lid off you will want to drink the whole gallon.   It smells awesome!
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
Re: EMULSION RECOMMENDATION PLEASE
« Reply #39 on: March 07, 2015, 02:35:04 PM »
CCI orange for water based and discharge without diazo?

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Re: EMULSION RECOMMENDATION PLEASE
« Reply #40 on: March 07, 2015, 05:40:05 PM »
CCI orange for water based and discharge without diazo?

no, its for plastisol
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: EMULSION RECOMMENDATION PLEASE
« Reply #41 on: March 07, 2015, 06:04:01 PM »
Actually, if it's the TX Orange you're talking about, the tech sheet says good for Plastisol, WB and Discharge
That rug really tied the room together, did it not?

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
Re: EMULSION RECOMMENDATION PLEASE
« Reply #42 on: March 08, 2015, 05:41:42 AM »
Anyybody check cci orange for waterbase and discharge?