Ok, I've been struggling with this one for 1.5 days. It's due tomorrow morning. 300 pieces on gildan indigo. At least print is only 12"x~4" tall.
8 color automatic, but only 1 flash. No revolver mode but I have a step-back flash ability within 1 color of flash station.
Current order is white in head 2, flash head 3, green head 4, golden yellow head 5, bright blue head 6, pink in head 7.
Wiflex inks for all but the bright green-it's union.
I started with 200 for underbase, 2 strokes. Top colors look closest to final color. Also stried underbase with 2 strokes flash and 1 stroke but top colors are too light. I have 200, 230, 280 mesh available. Tight Shurloc screens.
280 mesh for other colors. Tried changing out blue & pink to 200 mesh and layed down angle for squeegees but the last color doesn't like stepped on. Both pink & blue.
Problem is blue & the pink don't like to be stepped on. I have changed the order and doesn't make a difference. Using minimal pressure
Was going to do a top white in head 8 but since I've having stepping-on issues don't think it's going to work.
Help! Thanks.
See image, I changed text for confidentiality.