« previous next »
Pages: [1]   Go Down

Author Topic: Mimaki CJV30 print cutter  (Read 922 times)

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2071
Mimaki CJV30 print cutter
« on: February 09, 2015, 06:51:34 PM »
We are ready to buy a Mimaki CJV30 print cutter. We have a lot of requests for transfers and vinyl stickers and we just saw that machine at a trade show here.
Are there any users of this machine on this fine forum? Would lover to get some feedback on this or similar Mimaki print cutters. The good the bad and the ugly.
Logged

Offline Du Manchu

  • Verified/Junior
  • **
  • Posts: 77
Re: Mimaki CJV30 print cutter
« Reply #1 on: February 11, 2015, 10:50:59 PM »
No idea about this model or Mimaki, but just a few thoughts….EcoSolvent printers like this will need to be ventilated.  Certain jobs will need to be laminated for long term durability.  If you see the possibility of the machine staying busy, your output is limited due to the PRINT THEN CUT aspect of the machine.  For speed, you'll be better off with a printer and then a separate cutter.

The HP Latex L360 machines print on a bunch of different substrates like fabric, are green friendly, fast, and loaded with features.   No idea what your budget is, but they are probably about $16k, and a nice cutter might be $5k (just guessing)

Good luck.
Logged

Offline TCred

  • Verified/Junior
  • **
  • Posts: 63
Re: Mimaki CJV30 print cutter
« Reply #2 on: February 12, 2015, 06:57:43 AM »
We have one, what do you want to know?
Logged
Pages: [1]   Go Up
« previous next »