Author Topic: Customer wants to Tye-Dye their own shirts...  (Read 3087 times)

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Customer wants to Tye-Dye their own shirts...
« on: January 28, 2015, 01:46:50 PM »
Should they do this BEFORE or AFTER we screen print them?


Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7856
Re: Customer wants to Tye-Dye their own shirts...
« Reply #1 on: January 28, 2015, 01:47:30 PM »
AFTER

Offline jvanick

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2477
Re: Customer wants to Tye-Dye their own shirts...
« Reply #2 on: January 28, 2015, 01:53:17 PM »
Definitely after.

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Customer wants to Tye-Dye their own shirts...
« Reply #3 on: January 28, 2015, 02:12:53 PM »
I know that printing them sucks... just wasn't sure if there would be an issue with dying them after putting plastisol on them.

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Customer wants to Tye-Dye their own shirts...
« Reply #4 on: January 28, 2015, 02:16:32 PM »
I've actually done it both ways sucessfully. Though I usually print the dyed shirts, due to a scheduling problem with a local Boy Scout troop getting the dying done,
we gave it a try and it was fine. Probably didn't get tied as tightly as blanks, but fine, nonetheless. This was plastisol, white and black. The tricky part for me was trusting that the white was down nicely.

And what sucks? I've never had a problem.
That rug really tied the room together, did it not?

Offline kingscreen

  • Gonzo Member
  • ******
  • Posts: 1161
Re: Customer wants to Tye-Dye their own shirts...
« Reply #5 on: January 28, 2015, 02:50:05 PM »
After.  Gildan makes a PFD (Prepped For Dyeing) option.
Scott Garnett
King Screen

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Customer wants to Tye-Dye their own shirts...
« Reply #6 on: January 28, 2015, 02:54:58 PM »
So, all of you who would rather print blanks before dying, do you have problems with the commercially dyed ones as well?
That rug really tied the room together, did it not?

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7856
Re: Customer wants to Tye-Dye their own shirts...
« Reply #7 on: January 28, 2015, 03:01:14 PM »
we do both...but i don't want shirts back that have been handled by the customer...

what if they wash them to set the dye?  fuzzier shirts = harder to print.  less handling from the customer is easier.

print the design in white & black in case a shirt or 2 doesn't dye all the way, it will still look good.

Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: Customer wants to Tye-Dye their own shirts...
« Reply #8 on: January 28, 2015, 03:42:28 PM »
I've only done this once, and they dyed them before I printed.  I had them bring me the dye though and after some testing and research online figured out it was dischargeable.  I actually printed white discharge over the tie dye on half the run and it worked awesomely, and waterbased black on the other half, again without issue.  Not sure about migration since I didnt use plastisol on them...

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Customer wants to Tye-Dye their own shirts...
« Reply #9 on: January 28, 2015, 04:27:18 PM »
We've done both, but definitely prefer to print before the dyeing...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Ripcord

  • Sr. Member
  • ****
  • Posts: 283
Re: Customer wants to Tye-Dye their own shirts...
« Reply #10 on: January 28, 2015, 06:24:14 PM »
I'd rather print first, but I've done it both ways. If they dye it first or if I get already dyed shirts I use low bleed ink.
Raster to vector conversion

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Customer wants to Tye-Dye their own shirts...
« Reply #11 on: February 02, 2015, 06:13:06 PM »
print the design in white & black in case a shirt or 2 doesn't dye all the way, it will still look good.

Brad, expand on what you are saying here please.


They are wanting to the print to be Teal and Light Blue.  I'm willing to advise them that they are stupid (because they are) and tell them what they SHOULD do.  Just want to know what I should be telling them before I do.

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7856
Re: Customer wants to Tye-Dye their own shirts...
« Reply #12 on: February 03, 2015, 07:21:30 AM »
that should be fine...i can't tie dye for sh!t, so the outside of my shirt always ended up heavily dyed and the print area was left pretty much white.

we usually print them in white so the print shows up no matter what color is used...but when you are like me...it doesn't work too well to have a white only print.

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Customer wants to Tye-Dye their own shirts...
« Reply #13 on: February 03, 2015, 11:54:32 AM »
by using two contrasting colors for the art you are making sure there is enough contrast to see it regardless of the background (white ink on the part that's very light in color would be hard to read. By adding a dark stroke around it the problem is eliminated). We always outline the art going on the TD garments and usually print after dyeing.

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Customer wants to Tye-Dye their own shirts...
« Reply #14 on: February 03, 2015, 12:05:48 PM »
Here is what they are WANTING.

We are about to throw some tye dye images under to see how it looks.

We aren't feeling like it's gonna pop the way it is now.