screen printing > DIY - From master engineered marvels to cobbled together jury-rigged or Jerry-built junk!
DIY Spot Cleaning Station
Binkspot:
Been using CCI SR.-97 in mine for the past four years and haven blown anything up yet. Just makes toxic chemicals when comes in contact with flame, heated element or sparks.
tonypep:
TS-3 is non-flammable. Been doing it this way for 20 ys here. Dry-vac exhausts next to fan and draws any vapors out immediately. And again the air hose is a good idea. Prevents rings as well
mk162:
I would recommend a piece of old screen mesh over the stainless mesh, less likely to punch a hole in a thin shirt this way
tonypep:
That's how ours are fitted
Printficient:
Xenon Spotbuster is a great spot fluid. Alcohol carrier makes it evaporate almost instantly.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version