Author Topic: Foil stick  (Read 1386 times)

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
Foil stick
« on: December 18, 2014, 10:29:02 AM »
Foil stick to magna discharge clear on heat press . Any suggestion?.


Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: Foil stick
« Reply #1 on: December 18, 2014, 03:22:06 PM »
Add more penetrant?
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline Itsa Little CrOoked

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1295
Re: Foil stick
« Reply #2 on: December 18, 2014, 05:11:41 PM »
We sometimes get tiny flecks of foil with some colors that want to stick to the WB Discharge ink. I don't believe those flecks survive the first trip through the laundry, but I'm not 100% positive on that.

I don't like it, but it doesn't always happen and not a single custy has complained. (Weird)

Currently my bases are CCI D-Base Premium and D-White. Pigments are a mix of CCI and Matsui. I'm also interested in the answer to this problem.

Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: Foil stick
« Reply #3 on: December 18, 2014, 05:59:25 PM »
First wash will clean any little specs off without issue.  I see it occasionally on my white discharge prints with foil.

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
Re: Foil stick
« Reply #4 on: December 19, 2014, 10:25:29 AM »
on 100% cotton its less and 50/50 its more stick.

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Foil stick
« Reply #5 on: December 19, 2014, 10:50:32 AM »
Are shirts printed with discharge (and foil) destined for retail usually pre-washed? If not, these "specks" could really hurt "off-the-rack" sales.
That rug really tied the room together, did it not?

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
Re: Foil stick
« Reply #6 on: December 19, 2014, 11:34:46 AM »
Is there any foil resist.?

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4281
Re: Foil stick
« Reply #7 on: December 19, 2014, 01:06:31 PM »
I've only ever seen it on white discharge due to the pigment load. A swift snap like when loading a shirt
on press usually takes care of any flecks. As does a bit of universal solvent in the ink.