A Little Help please

[tonyt79]

I am having some issues today! I seemed to have awoke this morning in one hell of a mood. That plus some computer issues is affecting my work. I have commited to go help someone later so now I am freaking out because i need to leave early. Isn't this how it always works!

Yesterday morning I printed some Hoodies 4 color left chest with no problems. Today I am printing some 3 color left chest t-shirts and I am going crazy. I have got it all registered and set up. Start to print and I am getting a good print on 2 heads and out of registration on 2 heads. I have a Vastex v-2000 6/4. Did something become unlevel? What would be the the best thing to check? I am going to measure the pallets but I am trying to avoid taking them down.

[Sbrem]

Hmmm, I would print one of the 2 colors that is in register as a baseline, then adjust the 2 that are out, and see what happens. You probably know the obvious things like are all the knobs tightened and the like, but when you're under duress, the simplest things can be overlooked. Vastex makes fairly solid stuff (I started on one waaaayyyy back) so hopefully it's something simple...

Steve

[tonyt79]

I got it fixed. Turned out to be loose bolt on the pallets. Ended up wiggling them till I could feel it give some. Weren't very loose but after tightening all up seems to be good