Author Topic: Squeegee help please  (Read 981 times)

Offline tancehughes

  • !!!
  • Hero Member
  • *****
  • Posts: 555
  • Always learning new things!
Squeegee help please
« on: December 15, 2014, 11:37:06 AM »
I can't get the rubber out of this squeegee. I've taken the nuts off the bolts, but these dudes are stuck. I have no clue how long they've been in there as these are the squeegees from the gauntlet II I just purchased.

Help!


Offline tancehughes

  • !!!
  • Hero Member
  • *****
  • Posts: 555
  • Always learning new things!
Re: Squeegee help please
« Reply #1 on: December 15, 2014, 11:45:07 AM »
Never mind I got it. Just beat the bolts out. Still tight but it works

Offline Underbase37

  • Hero Member
  • *****
  • Posts: 790
Re: Squeegee help please
« Reply #2 on: December 15, 2014, 11:23:42 PM »
Sometimes these get over tightened & it permanently bends the metal in. Or worse yet the bolt shears off. ( this can really suck if the bolt is now bent & stuck.)

Murphy37


Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Squeegee help please
« Reply #3 on: December 16, 2014, 09:44:18 AM »
Never mind I got it. Just beat the bolts out. Still tight but it works

Whenever "beating" on a bolt or machine screw, put the nut on it loosely to take the hits and reduce possibility of damaging threads.

Also, a C-clamp can be used as a removal press with a socket used as a collar over the head.
That rug really tied the room together, did it not?