Author Topic: Printing over / across hoodie Pockets  (Read 1115 times)

Offline rmonks

  • !!!
  • Sr. Member
  • ****
  • Posts: 457
Printing over / across hoodie Pockets
« on: December 12, 2014, 02:25:21 PM »
I have a job in the works that could possibly result in printing on and across the pocket of hoodies, I have never intentionally printed across the pocket, but was wonder if anyone has any tips on doing so, I can see possible issues with the area where the pocket is sewn on to the Hoodie. I just recently purchased the roller squeegee from Action, and was thinking of incorporating that into the mix.


Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: Printing over / across hoodie Pockets
« Reply #1 on: December 12, 2014, 02:28:40 PM »
Foam on pallet and light spray tac in the pocket.

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: Printing over / across hoodie Pockets
« Reply #2 on: December 12, 2014, 04:45:40 PM »
we do it all the time here up to 12 colors.
We also use the roller, same as normal.

print like normal with a small shot of tac in the pockets.

Don't expect reg to be perfect, as it can and will move a little bit. Just add a disclaimer so the custy understands.

Blacktop Graphics Screenprinting and Consulting Services