« previous next »
Pages: [1]   Go Down

Author Topic: Printing metallics wet-on-wet  (Read 877 times)

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2074
Printing metallics wet-on-wet
« on: November 14, 2014, 06:23:54 PM »
We have this band that gets 300 tees. All black tees with metallic gold and silver print. Front and back. 2 colors.
I assume we underbase it all white but then is it possible to print the metallic gold and silver wet on wet?
All plastisol, Wilflex Liquid Silver and Union Mirror Gold.

Logged

Offline DannyGruninger

  • Gonzo Member
  • ******
  • Posts: 1220
Re: Printing metallics wet-on-wet
« Reply #1 on: November 14, 2014, 06:26:29 PM »
I don't put a base under metallic ink here..... I find if the mesh is correct the base slightly diminishes the look of the metallic. Someone wants a 2 color metallic I would print Gold, flash, then silver with no base.


Logged
Danny Gruninger
Denver Print House / Lakewood Colorado
https://www.instagram.com/denverprinthouse

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3540
Re: Printing metallics wet-on-wet
« Reply #2 on: November 14, 2014, 07:26:25 PM »
we do the same. all with low mesh, usually around 80
Logged
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2074
Re: Printing metallics wet-on-wet
« Reply #3 on: November 14, 2014, 07:28:06 PM »
Sounds good to me.
Will give it go.

Thanks guys.
Logged
Pages: [1]   Go Up
« previous next »