Author Topic: Cleaning Coater for Efficiency  (Read 6423 times)

Offline farmboygraphics

  • Hero Member
  • *****
  • Posts: 619
Re: Cleaning Coater for Efficiency
« Reply #30 on: January 14, 2015, 10:38:00 PM »
We only coat every few days so we just spatula out the scoop coater, rinse with warm water and use a 1" paintbrush to clean the corners by the caps.

This, also we card it out and spritz it with a little stencil remover. Been using the same coater for over a decade and have never had to buff the edge, but I'm also the only one who's ever driven it :-)
Tees and Coffee


Offline IntegrityShirts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1179
Re: Cleaning Coater for Efficiency
« Reply #31 on: January 15, 2015, 11:33:47 AM »
I have always used my finger to empty the coater and haven't ever had any issues with the emulsion. Prop the coater up in the washout booth and pressure wash the rest out.