« previous next »
Pages: [1]   Go Down

Author Topic: bella 8880 poly/viscose blend  (Read 933 times)

Offline balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 984
bella 8880 poly/viscose blend
« on: October 30, 2014, 03:20:07 PM »
I can not get these things to sit still on the pallet. I have tried brush tac, mist spray and web spray. Does anyone have any experience/advice for these?
Thanks,
matt
Logged
When you dig grave will you make it shallow so that I can feel the rain?

Offline Inkworks

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1761
  • Pad&Screenprinter
Re: bella 8880 poly/viscose blend
« Reply #1 on: October 30, 2014, 04:03:46 PM »
Staples work, roofing nails too.

the stuff just sucks, and lord help you if you have to flash them a bit as sometimes they will just float off the pallet after a flash.

lots and lots' of glue, flash mist type adhesive helps a bit, but it's still not 100% good. We tend to build a base of web adhesive and then go flash/mist on top, but sometimes 4-5 coats of them while the platens heat up prior to printing on the auto, then flash/mist adh. before every new shirt.
Logged
Wishin' I was Fishin'

Offline balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 984
Re: bella 8880 poly/viscose blend
« Reply #2 on: October 30, 2014, 06:05:56 PM »
okay! I hate these. When I don not soak these in glue they shift. When I soak them in glue it all sticks to inside of shirt.
I think I am telling this client to pick something or someone else.
Logged
When you dig grave will you make it shallow so that I can feel the rain?

Offline Audifox

  • Sr. Member
  • ****
  • Posts: 388
Re: bella 8880 poly/viscose blend
« Reply #3 on: October 31, 2014, 02:16:05 PM »
We've done the 8800 tank. No more glue than normal (we use Tekbond ). But we only offer one color print.  We tint poly ink.
« Last Edit: October 31, 2014, 02:19:40 PM by Audifox »
Logged
Pages: [1]   Go Up
« previous next »