I-Image Slant Model Users unite

[GraphicDisorder]

No squeaking here.

[mk162]

i fixed it, you can use a lithium grease on the rear head support rail...not the front one with the bearings..it's behind the head.

i am not opposed to switching emulsions if you guys find something better, so far we are pleased with wr14 partly because the expo time is slow...with 7500w and no film, the times are stupid fast

[244]

Anyone else noticing a squeaking when the print head travels?  I know there is another member that has this happening and made the call and then was told there was nothing that could be done about it.  Just curious?  Not that it makes it non-functional but it's very annoying.

The squeak comes from the Epson carriage rail. It is annoying a little but harmless. even a little dust can make it happen/

[mk162]

yeah, it's the one really tucked up far inside...it's very small compared to the other one and a touch of light grease on the bottom fixes it.

[Doug S]

Thanks for the greasing tips.  I just couldn't tell where it was coming from.