Author Topic: Film Stretch  (Read 1195 times)

Offline JJPrint

  • Verified/Junior
  • **
  • Posts: 39
Film Stretch
« on: October 22, 2014, 03:30:07 PM »
We are printing our film on an Epson T3000 (roll material) and getting multi color jobs that the  film doesn't line up.  Any suggestions would be helpful.  Have used Ulano and Fixxon waterproof film same results.

thanks,
John


Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Film Stretch
« Reply #1 on: October 22, 2014, 04:27:58 PM »
I have heard these problems much more with rolls than with sheets. I used to hear of folks cutting their own sheets, and recently, I see suggestions to "re-spool" the roll. The rolls must be tighter than the feeds like.
That rug really tied the room together, did it not?

Offline Inkworks

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1761
  • Pad&Screenprinter
Re: Film Stretch
« Reply #2 on: October 22, 2014, 05:03:47 PM »
Also make sure your machine is warmed up before you print tight tolerance stuff, if your shop is cool in the morning, print some non-critical stuff first, then do the tricky stuff.

I assume you're printing everything in the same orientation on the film too right?
Wishin' I was Fishin'

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: Film Stretch
« Reply #3 on: October 22, 2014, 06:09:52 PM »
my guess is the film is not stretching but instead i would bet that the film is not consistantly  feeding through, slipping, dragging etc.  as the printer tries to pull from the roll. Depending on the size of the roll the drag and such. If you have a vinyl cutter the cutter requires the film to be payed off the roll as slack most likely for the same
reason of not adding the roll drag /  inertia to the feed rollers on the printer.
Simply try slacking out the film off the roll.
mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1093
Re: Film Stretch
« Reply #4 on: October 22, 2014, 06:27:29 PM »
I find make sure you print the direction for all films. If I print vertical on some and horizontal on some that's when i get problems with my 4800.
Shane

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: Film Stretch
« Reply #5 on: October 22, 2014, 07:32:00 PM »
the roll is not fed, it's static and the the feeder isn't strong enough to pull the roll.

pull a large part of the roll and let it hang behind the machine or use sheets.
Blacktop Graphics Screenprinting and Consulting Services

Offline gtmfg

  • Full Member
  • ***
  • Posts: 200
Re: Film Stretch
« Reply #6 on: October 22, 2014, 10:28:53 PM »
I've been struggling with the same issue for almost a year. Roll film on a 4900. Seems like on ours it happens when there is any gap in print and the printer spools with no printing it will almost always not line up. Today we printed a 6 color art lined up but the reggys didn't.

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: Film Stretch
« Reply #7 on: October 22, 2014, 11:44:23 PM »
I've been struggling with the same issue for almost a year. Roll film on a 4900. Seems like on ours it happens when there is any gap in print and the printer spools with no printing it will almost always not line up. Today we printed a 6 color art lined up but the reggys didn't.

I posted on a post a while back with some settings for the 4900 that will fix your issue. Part of it is the vacuum setting and a couple of other things. I can print 20 plus inch long films the reg marks line right up. I don't know where the hell the post is but hopefully you can dig it up. I would have to through the printer again and document the settings but won't have time for a few days to get to it.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline JJPrint

  • Verified/Junior
  • **
  • Posts: 39
Re: Film Stretch
« Reply #8 on: October 23, 2014, 09:17:51 AM »
We did increase  the "Feed Tension" and printed a 7 color job and all lined up perfectly, hopefully it's not a fluke.  Each image 17" long (from a roll).  Thanks for everyone's input.

Offline gtmfg

  • Full Member
  • ***
  • Posts: 200
Re: Film Stretch
« Reply #9 on: October 23, 2014, 11:35:21 PM »
Thanks JBlue!  Going to try the settings tomorrow.