"He who marches out of step hears another drum." ~ Ken Kesey
Quote from: bulldog on October 30, 2014, 01:54:06 PMI also use the Ryonet 15x15 hot peel papers. And their adhesion powder. It's the best combo I've used. I ordered some 15x15 from GSG and man are they garbage.I don't run my papers through first for one color.I use a 110 screen coated 2 thin/2 thick. I print a lot of white on 50/50s and this gives me the best opacity. You might be able to get away with less on black ink.I run my transfers through the dryer at 199 degrees (this will vary for you with speed/temp/dryer brand) - I do it just enough to gel the ink. Too hot and it will cause problems later.Hix heat press...366 for 6 seconds on 7 pressure. That will vary according to your ink.With my ink it is regular plastisol but I use a hot split additive. Not 100% sure if it is necessary but it works good for me.I went with the Ryonet products you mentioned.....should arrive next week..will be my Christmas vacation experimenting.
I also use the Ryonet 15x15 hot peel papers. And their adhesion powder. It's the best combo I've used. I ordered some 15x15 from GSG and man are they garbage.I don't run my papers through first for one color.I use a 110 screen coated 2 thin/2 thick. I print a lot of white on 50/50s and this gives me the best opacity. You might be able to get away with less on black ink.I run my transfers through the dryer at 199 degrees (this will vary for you with speed/temp/dryer brand) - I do it just enough to gel the ink. Too hot and it will cause problems later.Hix heat press...366 for 6 seconds on 7 pressure. That will vary according to your ink.With my ink it is regular plastisol but I use a hot split additive. Not 100% sure if it is necessary but it works good for me.
