Author Topic: Sreen Printing Chemicals  (Read 1045 times)

Offline islandtees

  • Full Member
  • ***
  • Posts: 233
Sreen Printing Chemicals
« on: September 22, 2014, 06:12:48 PM »
We are building  A/C area for cleaning screens. What ink chemicals do you use that don't stink the room up. We had a open area with outside fresh air so this was not a problem. Im mostly worried about the ink remover. We use a recirculating tank right now for removing the ink. Then another booth for emulsion removing then a sink for degreasing. Some of you use a dip tank but we have a septic system and Im worried about ink down the drain. What do you use and how do you do it. Thanks


Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: Sreen Printing Chemicals
« Reply #1 on: September 22, 2014, 08:45:11 PM »
Franmar sounds like the ticket for you
http://www.franmar.com/index.php?main_page=index&cPath=76

mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: Sreen Printing Chemicals
« Reply #2 on: September 23, 2014, 07:57:56 AM »
Xenon has a full line of sink safe chemistries.  Give me a call.  Citrus, Water and Soy based. 404-895-1796
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald