« previous next »
Pages: [1]   Go Down

Author Topic: Print size for  (Read 879 times)

Offline Donnie

  • !!!
  • Hero Member
  • *****
  • Posts: 614
Print size for
« on: August 22, 2014, 12:59:44 PM »
Doing some shorts. Printing on the leg of shorts.... As a general rule, for adult shorts what would be a standard print size?
Logged

Offline Doug B

  • !!!
  • Hero Member
  • *****
  • Posts: 547
Re: Print size for
« Reply #1 on: August 22, 2014, 01:05:29 PM »
  To me, about the same as left chest. Maybe a little bigger if they are a huge
athletic type short.
Logged

Offline papinc

  • Verified/Junior
  • **
  • Posts: 40
Re: Print size for
« Reply #2 on: August 22, 2014, 01:05:45 PM »
I would say for the majority of what I've done... 3 1/2" - 4" wide...

Height dependent on image...

Hope this helps ;)

Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Print size for
« Reply #3 on: August 22, 2014, 01:25:34 PM »
In the end, as always, it's what the custy wants. Never hurts to run it by them.
Logged
That rug really tied the room together, did it not?

Offline Screened Gear

  • Gonzo Member
  • ******
  • Posts: 2580
Re: Print size for
« Reply #4 on: August 22, 2014, 01:47:52 PM »
Quote from: Frog on August 22, 2014, 01:25:34 PM
In the end, as always, it's what the custy wants. Never hurts to run it by them.

This is what I do. I also send a mockup proof of it so that you have some thing to fall back on if they have an issue.
Logged
Pages: [1]   Go Up
« previous next »