screen printing > Separations

Just moved upto a Epson 4800

(1/3) > >>

projay:
Any suggestions on printer settings to obtain dark black on films.  New to this printer any tips/suggestions would be appreciated.

-Jay

jsheridan:
yeah..


ACCURIP!

inkbrigade:
We have the same printer and get pretty black films with just the black cart printing. We also use accurip.

squeezee:
The K3 ink in the 4800 is weaker than one would wish for screenprint positives.  You can get a Wasatch RIP SP which allows you to print at  hi-res and lower he ink to about 50%, that should give you a good dense positive.

jsheridan:

--- Quote from: squeezee on August 23, 2011, 04:36:49 AM ---The K3 ink in the 4800 is weaker than one would wish for screenprint positives.  You can get a Wasatch RIP SP which allows you to print at  hi-res and lower he ink to about 50%, that should give you a good dense positive.

--- End quote ---


Dump the K3 and get Dye.
Then you don't have to use that nasty milky waterproof film and you can use this film for $56 bucks!

http://stuff4print.com/catalog/index.php?main_page=product_info&cPath=43_28&products_id=156

Navigation

[0] Message Index

[#] Next page