"He who marches out of step hears another drum." ~ Ken Kesey
Is it holding regerstration but the image is moving left to right on the pallets. Example pallet 1 image is 2" from the left side of the pallet #2 it's 2-1/2" #3 1-3/4" etc.
Quote from: Binkspot on August 11, 2014, 05:51:51 PMIs it holding regerstration but the image is moving left to right on the pallets. Example pallet 1 image is 2" from the left side of the pallet #2 it's 2-1/2" #3 1-3/4" etc.Yes, exactly. There are currently 3 pallets that print about 2 centimeters off. If I line the exact same design up on the 1st head and then on head 5 and check the registration across each pallet there are 3 that are off a centimeter. Head 3,4, and 7 it seems.We measured and it really is inconsistent across all of them as far as where it is printing from pallet to pallet. I'll post some pictures a bit later when I get home. Again, is there any techs who can help and come work on this machine?
How? Theyre all supposedly level? It is not staying registered. If I line up two of the same screens on head 1 and head 5 using the first pallet, there are 3 pallets that do not print registered. It is registered on the other 5.