Author Topic: All-Over print on a manual?  (Read 3211 times)

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: All-Over print on a manual?
« Reply #15 on: August 03, 2014, 08:50:52 AM »
Is there any issue with licensing on these when they use the sorority names?
« Last Edit: August 03, 2014, 09:18:35 AM by Frog »
That rug really tied the room together, did it not?


Offline broadway

  • !!!
  • Full Member
  • ***
  • Posts: 205
Re: All-Over print on a manual?
« Reply #16 on: August 03, 2014, 09:14:47 AM »
The original ones i have seen are not your average garment. Some thought went into the deisgning of the shirt, maybe to make printing easier on the back. But now i see many similar prints on your basic tee. They all say the same thing for the tourist, simple 1 color prints. The retail  customer i print for sells the real thing and he has to go through a California company who produces ($28.00 wholesale) them and he has a local rep. He does have some exclusive rights to certain names/locations on the back but not the garment itself. Two summers ago no one cared about these shirts, but the Soroties down South have made them a hot item for the summer. I beleive it is puff ink on them, i have only seen wihte ink though. They might use puff to make it easier to print on dark colors.

Offline Mark @ Hurricane Printing

  • Hero Member
  • *****
  • Posts: 567
Re: All-Over print on a manual?
« Reply #17 on: August 03, 2014, 10:29:13 AM »
he is not using college names....he is making them with his company name i believe...i don't know the specifics yet...he just asked if i could do it...he is looking into purchasing the shirts first because he says he get lots of requests for them.
so it definitely is puff ink then, correct?
Mark

Offline broadway

  • !!!
  • Full Member
  • ***
  • Posts: 205
Re: All-Over print on a manual?
« Reply #18 on: August 03, 2014, 11:14:42 AM »
To the best of my knowledge, it was white puff ink on the garment.

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: All-Over print on a manual?
« Reply #19 on: August 06, 2014, 08:19:48 AM »
Theres another thread on this ;)

Offline Mark @ Hurricane Printing

  • Hero Member
  • *****
  • Posts: 567
Re: All-Over print on a manual?
« Reply #20 on: August 06, 2014, 09:33:00 AM »
Theres another thread on this ;)

link?
Mark

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: All-Over print on a manual?
« Reply #21 on: August 06, 2014, 10:18:55 AM »
Check unread it is current

Offline Action1

  • Sr. Member
  • ****
  • Posts: 486
Re: All-Over print on a manual?
« Reply #22 on: August 06, 2014, 10:30:31 AM »
We have several solutions available for doing this on your machine. One that comes to mind that would side frame holder friendly is the large hold down that you see pictured below. The method of orienting the shirt as you see shown eliminates the need for custom frames and additional hardware.  These are 20" x 28" and will work for all long sleeve shirt sizes. Proper placement is accomplished using pallet paper with an outline of the shirt marked out.