Author Topic: How would you print this? (Read 1241 times)

jason-23 · « **on:** May 05, 2014, 04:39:34 PM »

Customer wants this on kelly green.....

Sbrem · « **Reply #1 on:** May 05, 2014, 05:36:26 PM »

Of course, on Kelly, why not? I would change the green to white (or some neutral light color, gray, beige) and use 2 blacks, one for the silhouettes, and the second
for the rest... float that by them and see if they bite...

Steve

mimosatexas · « **Reply #2 on:** May 05, 2014, 06:03:55 PM »

the off centered elements and stretched out stuff makes me cry

I second changing green to white, and either using black for the silhouettes. I might do a dark or light green for the other elements though, for a more tone on tone look.

jason-23 · « **Reply #3 on:** May 05, 2014, 06:44:15 PM »

Yeah I know it sucks, I didn't do the design. Thanks for the ideas, I will run it by them.

Dottonedan · « **Reply #4 on:** May 05, 2014, 07:59:01 PM »

I would challenge myself and knock that small serrifed type out of the base white on a 110 mesh. LOL.
Just kidding there. Don't do it! LOL.

Ditto what they said.

jvanick · « **Reply #5 on:** May 05, 2014, 08:17:32 PM »

clear base for the green parts? go for a true tone-on-tone?

News:

Author Topic: How would you print this? (Read 1241 times)

jason-23

How would you print this?

Sbrem

Re: How would you print this?

mimosatexas

Re: How would you print this?

jason-23

Re: How would you print this?

Dottonedan

Re: How would you print this?

jvanick

Re: How would you print this?