Jumped on Starlight bandwagon.

[screenprintguy]

Wish I was an equipment salesmen, I could rack up on you guys right now with all this new stuff coming out  congrats on your buy Brandt, MOVING ON UP!!!

Darryl

hahahahahahahahahahahah

[dirkdiggler]

this time you beat me to it!  I will have questions for you once you get it.  Excited for ya.

[Underbase37]

Congrats, we have been talking about jumping in on  this bandwagon here too.

Murphy37

[DannyGruninger]

Big b you should have jumped on the I image ste bandwagon!  Lol nice buy though saw it run when I was at m&r recently it was super nice.

[GraphicDisorder]

Big b you should have jumped on the I image ste bandwagon!  Lol nice buy though saw it run when I was at m&r recently it was super nice.

Wanted to pretty bad.  I figure this LED unit will tide us over and ill sell it when we go DTS. 

[GraphicDisorder]

and just like that its here.

[mk162]

nice...you could easily build a shelf/bench and stack 2 of those and take up no floor space.

[GraphicDisorder]

nice...you could easily build a shelf/bench and stack 2 of those and take up no floor space.

I was thinking the same thing. We are going to put one of our small drying cabinets under it.

[244]

nice...you could easily build a shelf/bench and stack 2 of those and take up no floor space.

Two would be overkill in my opinion. He can do upwards of 300 in an 8 hour shift easily.

[jvanick]

with ours, it takes me longer to align films on the screen, and rinse out the screen than it does to expose... 

[mk162]

2 is overkill, but a great backup is not

best part is, when your backup is the same as your original, there isn't any messing around with exposure calculations.

[244]

2 is overkill, but a great backup is not

best part is, when your backup is the same as your original, there isn't any messing around with exposure calculations.

The light source has a lifetime warranty and if a customer has a failure of a component on the light board we will ship next day a replacement that takes about 15 minutes to change. I would not suggest a backup for this system.

[GraphicDisorder]

Doing some testing on burn times.  Tried 22-24-26-28 on a 230.  It looks like 30 or 32 seconds would be dead on.  I was hoping to have it figured out ubber quick so we could do tomorrows screens but we are short on time.  But maybe over the weekend we will figure it out. 

We are using DZ 307 if anyone is also using that. 

[244]

Doing some testing on burn times.  Tried 22-24-26-28 on a 230.  It looks like 30 or 32 seconds would be dead on.  I was hoping to have it figured out ubber quick so we could do tomorrows screens but we are short on time.  But maybe over the weekend we will figure it out. 

We are using DZ 307 if anyone is also using that.

you should be between 32 to 35 seconds for that emulsion on yellow mesh230. 22 to 26 on white 230 mesh.

[GraphicDisorder]

Doing some testing on burn times.  Tried 22-24-26-28 on a 230.  It looks like 30 or 32 seconds would be dead on.  I was hoping to have it figured out ubber quick so we could do tomorrows screens but we are short on time.  But maybe over the weekend we will figure it out. 

We are using DZ 307 if anyone is also using that.

you should be between 32 to 35 seconds for that emulsion on yellow mesh230. 22 to 26 on white 230 mesh.

Awesome got any numbers for say-

158:
196:
305: