the other thread of Alan's tri-loc system made me realize that I wanted to share what we use for registration of jobs...
the only thing we don't have yet is a way to quickly align the screens on the press... but for my 'ghetto' fix, I used a fine sharpie to put 2 lines on my first platen (one to indicate center that goes all the way down the center of the platen, one that lines up with the top 3 registration marks... all my films are created with the top 3 registration marks in the same position, and the art is always in the same positions on the film as well.
Our 'preregistration' jig is just a piece of plexi with 2 pieces of wood screwed to it to align the corner of the screen... there's a piece of film with registration marks taped to the plexi. this puts the registration marks in their perfect position for our press... (roughly 6.5" from the top outside edge of the screen.) Line up the registration marks on the art to the registration marks on the template, tape the film down, and go.
for non-tight registration jobs, I never have to micro at all... for tighter registration jobs, many times all I need is a quick move to get it in position.
I have built 2 of these.. one for the manual press 20x24 screens, one for the automatic press.
