Author Topic: Cleaning Brushes?  (Read 2413 times)

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5323
Cleaning Brushes?
« on: March 10, 2014, 03:28:37 PM »
Hey anyone use a cleaning brush that don't leave those little fiber hairs in the screen mesh..I know a lot of suppliers sell them cost there pretty cheap, but is there anything else.  I use a lot of 137 mesh and those seem to get the most in them and the 230's very little.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!


Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: Cleaning Brushes?
« Reply #1 on: March 10, 2014, 08:29:54 PM »
Not sure what you mean by cleaning

what are you cleaning? Ink, degreasing,  for chasing ink we use a typical paint brush with the bristles chopped short about 60% of original length or a scrubby pad. For degreasing we use a soft  auto wash brush like this one http://www.walmart.com/ip/Small-Soft-Bristle-Brush/23752078#ProductDetail
mooseman

DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5323
Re: Cleaning Brushes?
« Reply #2 on: March 11, 2014, 12:14:03 AM »
Scrub pads, that's what I,m asking about...a better scrub pad that holds up for breaking up ink on the screen.
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: Cleaning Brushes?
« Reply #3 on: March 11, 2014, 07:52:13 AM »
once again we simply use scrub pads from wallyworld for de ink and reclaim just do not seem to have any problems with the less than $2.00 items??????
mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: Cleaning Brushes?
« Reply #4 on: March 11, 2014, 09:30:10 AM »
I use something like this for everything but the reclaim


So, ink removal, dehazing, degreasing gets the brush like that, and a emulsion reclaim gets a reclaim scrub pad.

Offline sweetts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1768
  • Simplicity is the ultimate sophistication DUH
Re: Cleaning Brushes?
« Reply #5 on: March 11, 2014, 10:05:17 AM »
I use a plastic mesh pan scrubber, it hold a bit of moisture and works the dehaze in nicely best part no bristles, easy clean up and you can get them for like a buck


Sent from my iPad using Tapatalk
RT Screen Designs
Willowick Ohio
www.rtscreendesigns.com

Offline balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 984
Re: Cleaning Brushes?
« Reply #6 on: March 11, 2014, 11:45:03 AM »
i am using the envirofoam that I got at icc chemical. I will never go back to a brush.
When you dig grave will you make it shallow so that I can feel the rain?

Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: Cleaning Brushes?
« Reply #7 on: March 11, 2014, 12:33:39 PM »
We use red replaceable scrubby pads that go on the handles like in this video.
Screen Printing Multi-Purpose Screen Scrub Brush
We get them from Screen Process of Alabama. Not sure the difference, but the ones they sell hold up longer and don't fiber out like others do. The ones from homedepot and lowes break down a lot faster. As soon as one starts to get a little too soft, it becomes the dirty scrub and a new one gets pulled out for the use with the degrease/dehaze. We use two, plus a corse solvent resistant brush for heavier ink degrading with beeniedoo
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5323
Re: Cleaning Brushes?
« Reply #8 on: March 11, 2014, 02:50:12 PM »
Steve Bragg from ICC gave me a sample of the envirofoam pad use it a little bit, would be nice if it had a handle.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline ABuffington

  • Hero Member
  • *****
  • Posts: 545
Re: Cleaning Brushes?
« Reply #9 on: March 11, 2014, 03:01:45 PM »
Softer bristle brushes do not damage fine mesh counts or thin thread meshes.
Avoid any brush that would scrap your skin since it will also put tiny cuts on fine threads and lead to mesh failure on higher mesh counts
and thin S threads.
Alan Buffington
Murakami Screen USA  - Technical Support and Sales
www.murakamiscreen.com

Offline prozyan

  • Hero Member
  • *****
  • Posts: 510
Re: Cleaning Brushes?
« Reply #10 on: March 11, 2014, 03:18:27 PM »
I haven't used anything except sponges in a little over a year.
If Barbie is so popular, why do you have to buy her friends?