Author Topic: Epson 4880 pump question  (Read 990 times)

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2074
Epson 4880 pump question
« on: March 11, 2014, 12:33:37 AM »
When printing a normal sized image, anything bigger then 8 inches or so, our Epson 4880 stops after half the print for a short period and you can hear the pump kick in. After the pump finished doing whatever it had to do that moment the printer continues printing. Is that normal, I never had this happening on our Epson 4000.


Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: Epson 4880 pump question
« Reply #1 on: March 11, 2014, 09:03:13 AM »
Like many printers after printing a certain amount of size it will stop to do a head wipe. Its not a cleaning cycle just a head wipe (or spit) this will get rid of excess ink building up after printing for so long.
"No man is an island"

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: Epson 4880 pump question
« Reply #2 on: March 11, 2014, 09:17:43 AM »
also, the way the systems usually work is the pump sucks like a vacuum from the bottom of the head on a capping station.  so when the pump runs it is refilling the head with ink.

think of it as a piston dropping in an engine and sucking the gas in like in older carburetors

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Epson 4880 pump question
« Reply #3 on: March 13, 2014, 07:55:08 AM »
You can turn that of in the printer menu. Something about not allowing the head cleaning.

Pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2074
Re: Epson 4880 pump question
« Reply #4 on: March 13, 2014, 07:46:36 PM »
You can turn that of in the printer menu. Something about not allowing the head cleaning.

Pierre
I think that option is for the cleaning cycle that kicks in automatically before start printing. What I mean is that our printer starts printing half the way through the print the print head stops for a while then you can hear the pump kick in. Once the pump has finished it`s business the printer continues printing. I never had this with our Epson 4000.