transfers not transferring

[Sbrem]

We made some 2 color transfers for some ladies running tanks, (bra inside) and suddenly, a couple of the transfers won't release from the paper. Overcured before transferring?

Steve

[SkylinePrints]

sounds like it.  i had it happen once before and that ended up being the culprit. 

[ErinAllenLamb]

Generally it is over gel before transfer or not enough heat/pressure/time under the heat press.  I can take this question to our resident tranfer expert, but I know he will ask me: What ink you are using, how you are gellling and what temp, what paper you are using and your transfer parameters.

Erin

[SkylinePrints]

Generally it is over gel before transfer or not enough heat/pressure/time under the heat press.  I can take this question to our resident tranfer expert, but I know he will ask me: What ink you are using, how you are gellling and what temp, what paper you are using and your transfer parameters.

Erin

oh those experts always want to ask questions and never give answers.   

[Sbrem]

update, it was just one transfer, though I found the operator had the heat up too high, though the first dozen were OK. I reduced the heat from 375° to 325° and took the time down to 12 seconds or so, then gave an extra 10 with the silicone sheet. After talking it over, we decided that the overlay, or second color, should have overlaid the dark outline as well. Thanks for the replies.

Steve

[Homer]

we had this issue when SOMEBODY used the wrong side of the paper. We have about 10 different kinds and THOUGHT he had the right paper. . sonbitch was not happy to watch me throw them all out.