« previous next »
Pages: [1]   Go Down

Author Topic: Trim lines for air... 2/28  (Read 757 times)

Offline DCSP John

  • Sr. Member
  • ****
  • Posts: 340
Trim lines for air... 2/28
« on: February 28, 2014, 09:32:11 AM »
I want to run some two trim lines... one to washout, one for press cleaning.
What size hose do you guys use? 1/4"? I assume press size hose is not needed for trim air..



Thanks.  John
Logged

Offline Binkspot

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1108
Re: Trim lines for air... 2/28
« Reply #1 on: February 28, 2014, 10:43:18 AM »
At the press I would just tee off the air supply before the regulator and use a 1/4 hose. The wash out run 3/8" soft copper or nylon tubing to the booth and again have a 1/4 or 3/8 hose.
Logged

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2877
Re: Trim lines for air... 2/28
« Reply #2 on: February 28, 2014, 10:59:01 AM »
1/4" is what we use. For a blowout at the sink you can get a killer deal on this at harbor freight, has everything you need!
http://www.harborfreight.com/20-piece-air-compressor-starter-kit-68191.html#.UxCyNPldUfU
Logged
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com
Pages: [1]   Go Up
« previous next »