Author Topic: Good, affordable racks  (Read 3599 times)

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Good, affordable racks
« on: February 26, 2014, 09:45:37 PM »
Looking at the modified baker's style that are resold as screen racks. Need 4 of 'em, don't want to cheap out but $500+ for a screen rack?  Please. 

Anyone know of a good one?  Ours will move around in a loop, not long distances but a lot of shuffling on uneven wood floors.  M3 rollers, 23x31 and 25x30.

Ranar's look good for the price:
http://www.ranar.com/accessories/pre-press.html

There's a welded one and assembled one, assembled looks to be around $175 per.
« Last Edit: February 26, 2014, 09:49:58 PM by ZooCity »


Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: Good, affordable racks
« Reply #1 on: February 26, 2014, 10:13:19 PM »
500 bucks for a single screen rack..

Look at what I built for less than 400.
I've built just about every table, cabinet and whatnot from 2x4's and plywood.
The company makes its own screen panels as we have custom sized frames. Thats what the black panels are.

Features pass through screens in both cabinet and exposure unit. Forced air drying for wet screens on the wash side and sliding doors on tracks for storage above the exposure.

Still have much to do before it's completed.. when it is.. best screen room ever!!



« Last Edit: February 26, 2014, 10:17:33 PM by jsheridan »
Blacktop Graphics Screenprinting and Consulting Services

Offline gtmfg

  • Full Member
  • ***
  • Posts: 200
Re: Good, affordable racks
« Reply #2 on: February 26, 2014, 10:21:09 PM »
Alloy America.  I think I paid $199 that last time I bought them.  Holds 25?  I think I had to redrill the center bars but take two secs.

Offline gtmfg

  • Full Member
  • ***
  • Posts: 200

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Good, affordable racks
« Reply #4 on: February 27, 2014, 12:50:48 AM »
John could you explain how that setup would work?

Offline Screened Gear

  • Gonzo Member
  • ******
  • Posts: 2580
Re: Good, affordable racks
« Reply #5 on: February 27, 2014, 02:15:12 AM »
John,

Looks like some good work there. There is alot of things that looks funny to me. Why the raised floor? it that some California Code thing? The rest looks good. I like the pass though idea saves time. I would do that here but I would be passing it though to myself so not much times saved there. So the Pass though cabinets are your drying racks right. That way your not passing wet screens into the dry area.

So when is that shop going to be running? Can't wait to take a tour.


Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: Good, affordable racks
« Reply #7 on: February 27, 2014, 08:43:04 AM »
http://www.ebay.com/itm/ADJUSTABLE-ALUMINUM-DRYING-RACK-SCREEN-PRINTING-NEW-/331137948773?pt=LH_DefaultDomain_0&hash=item4d195c1c65


Contact those guys, they will give a better deal on more. I did buy a few squeegees from them in the past. I believe they are the same as an AA frames, both are from Pittsburgh area.

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Good, affordable racks
« Reply #8 on: February 27, 2014, 11:03:55 AM »
http://www.ebay.com/itm/ADJUSTABLE-ALUMINUM-DRYING-RACK-SCREEN-PRINTING-NEW-/331137948773?pt=LH_DefaultDomain_0&hash=item4d195c1c65


Contact those guys, they will give a better deal on more. I did buy a few squeegees from them in the past. I believe they are the same as an AA frames, both are from Pittsburgh area.


ditto!

got two for $400 delivered.

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Socalfmf

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1238
  • Lead, Follow or Get Out of the Way!
Re: Good, affordable racks
« Reply #9 on: February 27, 2014, 11:10:24 AM »

Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: Good, affordable racks
« Reply #10 on: February 27, 2014, 11:21:47 AM »
if you are handy, have the extra time, maybe and hour, and like to tinker with things. I picked up a 30 shelf bakers rolling rack used on ebay for 70 bucks, free shipping. Bought a few lengths of 3/8" threaded rod, and a few lengths of electrical conduit pipe. Cut the pipe into 6 peices wide enough to give me the space I needed to space the rack apart for 23x31 newmans. Cut the threaded rod to go through the frame of the rack, through the pipe, washer between the pipe and the rack, then washer a nut on the outside, basically the threaded rod and the pipe replaced the 6spacer bars that came with the rack but only allowed it to be 18" wide. Cost me all of 100 bucks and left me with enough rod and pipe/nuts and washers to do the same to a few more. Just an idea if you are the tinkering type. The time it would have taken to put a new one together was the same as doing this, add 30 mins to cut the pipe and the threaded rod. Not bad, just keeping my eyes peeled for more used racks. A used backers rack is nothing compare to used from a screen shop lol. These are a  nice rack, and the ranar ones are good too http://microperfect.net/CatalogFolder/PriceList5.htm
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: Good, affordable racks
« Reply #11 on: February 27, 2014, 12:15:14 PM »
John could you explain how that setup would work?

The design behind it to use the space as efficiently as possible without having to take more than 3 steps to do anything screen related. What you don't see is the wash tank, the dip tanks, the blockout box nor the other storage racks. You can't see to the left of the picture but that is where both presses and the dryer infeed are. Our entire operation runs from this area on a screen in/out loop system that follows a flow chart designed so that paths are not crossed.

The other thing you don't see if the 12'x60' mezzanine deck that goes above everything from the screen room on one end to the ink room on the other.

whats' with the elevated floor.. drum spill containment boxes. Being that the entire area is 'wet' any and all water falls into the boxes and evaporates out. It also keeps the floor clean as reclaim is known to be the dirtiest place in the shop. Our screen area is the heartbeat of the shop so it needs all the help in staying clean that we can give it.



« Last Edit: February 27, 2014, 12:17:48 PM by jsheridan »
Blacktop Graphics Screenprinting and Consulting Services

Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: Good, affordable racks
« Reply #12 on: February 27, 2014, 12:32:57 PM »
Here's pics of the mod, figured this might help understand, normally they come with a bar that spaces the rack apart, bolt goes through the frame of the rack, and into the bar, this mod was cheap, easy, and just as rugged.





Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: Good, affordable racks
« Reply #13 on: February 27, 2014, 02:49:00 PM »
After looking around for a while and getting screwed out of a good deal on a pair of the pre-built ones on craigslist (guy was asking $25 each, and when I showed up after driving an hour to get them he wanted $100 each...dick), I just decided to build one.  I would change one or two things when I build another one, but this one cost less than $50 and took 2 hours from start to finish, mostly spent angle grinding the curves and screwing the shelves in.  The rack holds 26 23x31 screens and is on casters.  The shelves are made from a piece of angled aluminum I found at lowe's in the same area as the gutters.  It was $1.17 for a 10 ft piece and I could make four shelves (2 screens worth) from each piece.  I cut all 30" sections needed, then clamped them together and used the angle grinded to create the curve on all the shelves at once, then used a grinding block to get the burrs out after they were screwed into the frame.  It was a lot faster than I originally thought it would be.

Yes I know I cracked the board at the top, but it is just cosmetic to hide the joint connecting the two sides so I didn't care enough to cut another piece.

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: Good, affordable racks
« Reply #14 on: February 27, 2014, 03:19:20 PM »
Dude, you cracked the board in the top right corner of the rack :)  Looks really good besides that cracked board in the top right corner.  I think I will build one like that except for the cracked board...in the top right corner...  I'm on my way to Lowes in a few to buy some goodies to finish a few projects and I think I will go ahead and get materials for a rolling rack.  Thanks for the inspiration and ideas.
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.