Author Topic: 90s Tuf Javelin Registration problem  (Read 2306 times)

Offline sirsean

  • Verified/Junior
  • **
  • Posts: 30
90s Tuf Javelin Registration problem
« on: February 19, 2014, 11:02:33 PM »
Im having registration issues on my Javelin, 4 Of my pallets keep perfect registration but the 5th-8th pallets are out of registration, where should i start to troubleshoot. Thanks In Advance.

Sean


Offline Inkworks

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1761
  • Pad&Screenprinter
Re: 90s Tuf Javelin Registration problem
« Reply #1 on: February 19, 2014, 11:05:02 PM »
Check pallet leveling. All should have the same off-contact to the same screen, or preferably, the stroke of one of the heads sgueegee or flood.
Wishin' I was Fishin'

Offline sirsean

  • Verified/Junior
  • **
  • Posts: 30
Re: 90s Tuf Javelin Registration problem
« Reply #2 on: February 19, 2014, 11:14:33 PM »
@inkworks Thanks!

Offline Baron265

  • Full Member
  • ***
  • Posts: 131
Re: 90s Tuf Javelin Registration problem
« Reply #3 on: February 20, 2014, 05:29:21 AM »
Give me a call if you need help.
Paul Schmidt
Regional Manager
Workhorse Products, Inc.
(602)414-3684
pschmidt@workhorseproducts.com

Offline sirsean

  • Verified/Junior
  • **
  • Posts: 30
Re: 90s Tuf Javelin Registration problem
« Reply #4 on: February 20, 2014, 08:52:53 AM »
@Paul thanks I will if i need to, I'm double checking everything this morning. Phil has been such a blessing to me since i got this thing up & running, Workhorse Rocks! I plan to purchase new soon, the support you guys provide is off the scale from a At!!! Thanks Again!

Offline jvanick

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2477
Re: 90s Tuf Javelin Registration problem
« Reply #5 on: February 20, 2014, 09:16:34 AM »
also check the bearings that the pallet arms ride up and down on... kinda hard to describe, but in the center shaft area there's 6 bearings, 3 on top, 3 on the bottom.  when the table is in the down position, make sure that all 3 bearings are tight (that is, if you try to roll them with your fingers, they don't roll), then table up and check the 3 lower bearings.

if any of them are loose, you'll definitely have problems.

Offline sirsean

  • Verified/Junior
  • **
  • Posts: 30
Re: 90s Tuf Javelin Registration problem
« Reply #6 on: February 20, 2014, 09:00:35 PM »
Thanks a million guys my pallets had worked themselves out of registration, used the two nickels for all pallets on a new screen & I'm back rolling registration perfect. Thanks everyone!