have a job that we are going to be doing on charcoal shirts. design is red/white/black. so black will be waterbase, red and white discharge. what order would I run this? I've always thought that you should run White last in discharge when possible to avoid stepping on it and not dull it/pick up white. in my head I would run Black/FLASH/Red/White. Any help would be good. Also in the design, white and red touch and red/black touch. White and black do not touch. Also Original design was run White/Red/Black, screens-160 mesh, 5% activator red, 10% activator white. Was run by people who know what they are doing but seeing this is really my first multi-color discharge, wanted to see what the opinions ( I know there will be many) are. thanks