"He who marches out of step hears another drum." ~ Ken Kesey
Only concern is that some of our lower mesh screens may sit around after being coated for a month or more.
I tested a 150 mesh coated 2/2 sharp side with WR-14. Exposed for 500 light units on the Nuarc 3140.... and it was underexposed, by a lot. Took FOREVER to reclaim since it was underexposed....... We coated the screen that way since we would use the emulsion for both plastisol and waterbase.I am sticking with the Saati PHU. About 20% to 35% longer exposure times than the Aquasol. I used to use the Aquasol, but I can get the Saati from my dealer who is 200 yards away
Finally got to play around with the CCI WR-14.So far, I love it. We're at about 250 ltu on the 3140, give or take. Not insanely longerthan the Aquasol.Our other supplier (I try to keep it to 3 maximum) is sending us one of the Murakami dual curesto try, I think the 7500?Kind of a no-duh moment. I would really only go back to Photopolymers if we were needing more screens a day than the 3140 could handle with dual cure. The latitude for correct exposure isjust that awesome.Only concern is that some of our lower mesh screens may sit around after being coated for a month or more.