Author Topic: Is this bad? Is this bad?  (Read 2617 times)

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Is this bad? Is this bad?
« on: August 04, 2011, 05:28:31 PM »
Well, our 4800 has been suffering from recent clogging, to the point that nothing prints, sublimation or film.  This is what I walked into yesterday afternoon.  My artist just went in after the printhead and we have decided to try and bring it back to life come hell or high water.  So far we have failed.  We've put it back on after soaking it with several different chemicals that people have mentioned and still nothing.  Anyone brought back a printhead from the dead?  It is extremely clogged and the little test prints yield hardly any ink from any nozzle coming through.  In the past 24 hours, we've tried everything, and as a last resort, we went for the screen opener about 10 minutes ago!  We'll see if that does the trick but something tells me that isn't going to fix the clog.  Updates to come.

I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.


Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Is this bad? Is this bad?
« Reply #1 on: August 04, 2011, 05:38:29 PM »
GOOD LUCK!
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5681
Re: Is this bad? Is this bad?
« Reply #2 on: August 05, 2011, 05:56:23 AM »
Alan.......GET AN EPSON TECH! You're in Texas there must be one around. We had same problems. Brought the guy in for a day. Not only did he get us back to perfect he showed us countless and priceless tips and techniques on how to keep her running smooth and clean. Yes it was $900 well spent.
best tp

Offline inkbrigade

  • Sr. Member
  • ****
  • Posts: 472
Re: Is this bad? Is this bad?
« Reply #3 on: August 05, 2011, 07:01:05 AM »
Hey Alan,
Sucks when the film printer is down. Not that this is much help now, but ever since we switched to this system about a year ago i haven't had a single problem with our epson 4800.
http://www.filmdirectonline.com/products/Single-Black-Large-Format-Ink-Kit.html
Maybe when you get things worked out look into it. Also keep an eye on craigslist for a back up 4880. They pop up from time to time at a steal!
-------------------------------
Wish List / Let me know if your selling any of the following:  Newman (Stretch Devices) Orange Screen Racks and Press Carts
Saturn Screen Racks / Press Cart

Offline rmonks

  • !!!
  • Sr. Member
  • ****
  • Posts: 457
Re: Is this bad? Is this bad?
« Reply #4 on: August 05, 2011, 07:02:22 AM »
The best thing I have found is warm windex through the veins of the system

Online mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7858
Re: Is this bad? Is this bad?
« Reply #5 on: August 05, 2011, 07:56:50 AM »
Or you can get the solution from squaredot.com  it really helped our 3000.  I think it's watered down alcohol...but the syringe is a great thing to have.

Screen opener won't do much since you are mixing polar and non-polar liquids.  Your best bet is windex.

Offline Command-Z

  • !!!
  • Hero Member
  • *****
  • Posts: 956
Re: Is this bad? Is this bad?
« Reply #6 on: August 05, 2011, 11:24:37 AM »
fixyourownprinter.com sells a solution and syringe as well, but for only $10

http://www.fixyourownprinter.com/kits/epson/K70

It saved an old Epson 1200 of mine once. Only ten bucks, it's worth a shot.
Design, Illustration and Color Separation for the Imprinted Apparel Industry for over 20 years. SeibelStudio.com
 Custom art not in the budget? Check out Bad Bonz Designs

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Is this bad? Is this bad?
« Reply #7 on: August 05, 2011, 11:30:55 AM »
So how did this happen? Did you leave the machine turned off for awhile?  And, if it's just one color that's clogged, screw it- use another for the black. 

Replacing the heads on these isn't as difficult as it might seem.  And, by the looks of it yer halfway there anyhow!
Brian made a set of videos for me, walking me through the steps so I could replace our head rather than him having to fly out to Montana.

Epson 4800 Head Replacement part 1

Epson 4800 Head Replacement part 2


You can easily pickup a 1400 locally for backup while you wait on the head.  Tony is right about the tech, use 'em if you got 'em. 

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5323
Re: Is this bad? Is this bad?
« Reply #8 on: August 05, 2011, 11:54:53 AM »
I brought my 3000 back to life by pumping straight alcohol into the printhead until it sprayed out clear, dried then and replace working fine ever since
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: Is this bad? Is this bad?
« Reply #9 on: August 05, 2011, 01:40:25 PM »
I wouldn't use screen opener it could delaminate the nozzles right off the head!
"No man is an island"

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: Is this bad? Is this bad?
« Reply #10 on: August 05, 2011, 04:49:49 PM »
Every nozzle is clogged right now, except #5.  I've been printing most of the day so I haven't had much time to check on the status of it, and our artist has been busy helping us outside.  I think he's tried the alcohol and of course the screen opener didn't work.  I'd almost rather buy a new printhead for 450 than bring in a tech, but on Monday, I'll check our options on a visit from an epson guy.
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.