New Press - Coming soon!

[inkman996]

Well, I see why it was for sale...it's going the wrong direction

LOL!!!!!!

[screenprintguy]

So the flood choppers don't chop huh, cool. They are just set to the screen, and it's the screens up and down motion that actually chop? learn something new every day. 

[GraphicDisorder]

Well, I see why it was for sale...it's going the wrong direction

For where the dryer made sense to go at the time clockwise makes most sense in our current spot.  But this press will run either direction

So the flood choppers don't chop huh, cool. They are just set to the screen, and it's the screens up and down motion that actually chop? learn something new every day. 

Correct.

[screenprintguy]

Congrats Brandt, you guys must be happier than a couple bears in a honey pit!!!! Have fun with it!

Mike

[dirkdiggler]

there is so much stuff on that press, when u learn something I don't know, you better share!

[3Deep]

If we bought that press I'd have to go buy some traps and throw over it and use it as a house too, that press looks very pricey.  thanks Brandt for the vid post more when you guys do a quick print run.

Darryl

[GraphicDisorder]

If we bought that press I'd have to go buy some traps and throw over it and use it as a house too, that press looks very pricey.  thanks Brandt for the vid post more when you guys do a quick print run.

Darryl

We will be printing today in a few minutes. 

[blue moon]

If we bought that press I'd have to go buy some traps and throw over it and use it as a house too, that press looks very pricey.  thanks Brandt for the vid post more when you guys do a quick print run.

Darryl

 

[Ryan]

the thing I really like about that press is how quick it gets from point A to B. You can print a lot faster without it seeming so or so I think in my world.

[screenprintguy]

A feature I like about the C3D is the programable air pressure. Cool to say, on certain artsy type designs, where you may do a double stroke, or if you have to revolve, first stroke is at 1 pressure setting, then say the second stroke, or say the same color on a second rev can be programed to have a lower pressure. Gives you control without walking around the machine to do some of those settings. Not everyone would even use that function, but if I had it, I would 

[GraphicDisorder]

[dirkdiggler]

looks awesome!, just curious, why didn't you run the power and air through the center shaft?

[GraphicDisorder]

looks awesome!, just curious, why didn't you run the power and air through the center shaft?

At the time of Sportsman install just short on cash.  Was a good bit more to run it that way. 

[DannyGruninger]

Brandt, looks awesome in there! I'll be needing to plan a trip out there to see that press kicking out the jams. I think we are going to try and replace our dback this year with a 3d so I'd like to play around with one if you don't mind. Our ch3 is so badass that I can only imagine how great the 3d is. Just today on our ch3 we printed over 4,000 shirts across 8 different PO's with 44 screens total. We have a job on press right now that we are double stroking and it's running 61 doz/hr double stroking! Let me know when would be a good time to make a day trip out your way, I've got some stuff to bring your way for you to test as well......

[GraphicDisorder]

Brandt, looks awesome in there! I'll be needing to plan a trip out there to see that press kicking out the jams. I think we are going to try and replace our dback this year with a 3d so I'd like to play around with one if you don't mind. Our ch3 is so badass that I can only imagine how great the 3d is. Just today on our ch3 we printed over 4,000 shirts across 8 different PO's with 44 screens total. We have a job on press right now that we are double stroking and it's running 61 doz/hr double stroking! Let me know when would be a good time to make a day trip out your way, I've got some stuff to bring your way for you to test as well......

We were double stroking a job this am 6 color job, 56dz a hour, and we are still really getting used to the press.  I need to come out to your shop some day, I doubt you will be impressed with our tiny operation but your welcome here and your welcome to play with the press all you like.