Author Topic: Photoshop CS6 and Accurip  (Read 1847 times)

Offline Doug S

  • Gonzo Member
  • ******
  • Posts: 1481
Photoshop CS6 and Accurip
« on: January 30, 2014, 12:01:12 PM »
I haven't ran separation with photoshop in a while.  The problem I'm having is that I don't get the option to run separations with the accurip printer when running out films .  It keeps telling me to under the print settings dialog box to "remember to enable the printers color management in the print settings dialog box"  I've went to the dialog box and haven't found a option to enable it.  Is this something that has to be done in photoshop itself? 

It's not a job if you love doing it.


Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Photoshop CS6 and Accurip
« Reply #1 on: January 30, 2014, 04:57:33 PM »
Drop the .psd file into Illustrator and out put form there.  .psd will transfer spots if you still have your RGB channels intact but use dcs 2.0 for multichannel PS files. 

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Photoshop CS6 and Accurip
« Reply #2 on: January 30, 2014, 04:58:48 PM »
Zoo beat me to it; that's how I've always done that. Illustrator sends it to AccuRIP, and AccuRIP prints the job...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Doug S

  • Gonzo Member
  • ******
  • Posts: 1481
Re: Photoshop CS6 and Accurip
« Reply #3 on: January 30, 2014, 06:06:28 PM »
Thanks for the info.  I will do that.  I would rather run from illustrator anyway.
It's not a job if you love doing it.