« previous next »
Pages: [1]   Go Down

Author Topic: hxt with hardener  (Read 1162 times)

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
hxt with hardener
« on: January 09, 2014, 08:03:21 AM »
We exposed hxt on 2k light around 4 minute.  After we use hardener. But its runs only 50 piece on water base. Can we also use diazo and than hardener?. Or only use diazo with no hardener.
Logged

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: hxt with hardener
« Reply #1 on: January 09, 2014, 08:07:51 AM »
What is your procedure for applying the hardener?
Logged
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
Re: hxt with hardener
« Reply #2 on: January 09, 2014, 08:29:58 AM »
with the help on sponge.
Logged

Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: hxt with hardener
« Reply #3 on: January 09, 2014, 12:43:28 PM »
How long are you leaving the hardener on the screen before printing?

What is the humidity of your screens/screen storage before exposure?

Are you post exposing?

Do your waterbase inks have solvents in them?
Logged
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.
Pages: [1]   Go Up
« previous next »