If you’re interested in seeing an MHM press in action but do not have time to visit a trade show or a shop, Hirsch recently released a new video showing the step-by-step procedure of setting up and printing with an MHM automatic press.
The video was shot at Jakprints, Inc., Cleveland Ohio (
www.jakprints.com). The video begins with the pallets being loaded and then the screens, including the push button controls to lock them in. Next a blank shirt is loaded onto the platen. Squeegees are installed and the pressure is adjusted. The micro-registration controls also are shown being set.
Once the press is completely set up, ink is loaded into each screen and the printing begins. Shirts are shown being printed, flash cured, and unloaded unto a dryer. Notice the can of ink sitting on the press. It takes a smooth-running press to be stable enough to set an ink can on it without falling off. The video ends with a finished shirt on a model.
MHM offers one of the fastest setups available. Check out this video at
http://tinyurl.com/6kwazlu to see for yourself how quick and easy it is to get an MHM up and running.
For more information, contact Hirsch International at 800-394-4426; e-mail: care@hic.us; or visit the website at
www.hic.us.
