screen printing > Screen Making

Permanent Block -Out on Shur-Loc panels

<< < (2/2)

ZooCity:
I've been mulling over a newman yellow tape/liquid tape combo. 

Try a newman or polyken tape "sandwich on the print and squeegee side to make a permanent ink dam then run the liquid tape out a half inch or so from the tape.  This will let you coat without having to ride over the tape, assuming the liquid tape is thin enough to get away with this.

Also, it's a pain but use the plastic fabric protectors, they work well. 

Navigation

[0] Message Index

[*] Previous page